How are TPE processed during extrusion processes?

The Extrusion Process

Grit Müller 19.08.2025 ■ 8 min read

最重要的事实简介

  • TPEs are ideal for processing using extrusion.
  • TPE are usually processed in standard extruders.
  • The wide range of compounds enables a multitude of possible combinations.

How are TPEs extruded?

During extrusion, the source material is filled as granules into the screws. The high temperatures within the heated cylinder make the material melt. The nozzle brings the molten material into the desired profile shape. After cooling and solidifying, it can be cut to the desired lengths.
Advantage of TPS: In contrast to other plastics, the shear rates enable additional heat to be applied here. This improves the flow characteristics and reduces energy costs, due to the lower cylinder temperatures possible as a result.

Does the machinery have to be modified or expanded when using TPEs?

Generally no. Extruders designed to produce thermoplastic materials are usually also suitable for processing KRAIBURG TPE materials. It is recommended to use standard three-zone screws with a minimum length of 25 D and a compression ratio of 3.5 to 1 and higher. A barrier screw is advantageous for shearing the material. We also recommend using perforated discs or screens.

What temperatures are recommended when processing TPEs using extruders?

Please always refer to the information provided in the respective data sheets when processing TPEs!
Overall, a temperature of 250 °C should be kept as the upper limit during processing. If the temperatures are higher than those specified in the respective data sheets and the residence times are too long, the material may be damaged.

Find the right TPE solution for your application


Making sure you get the best results: the right materials solutions have been developed for each of your specific applications.

 

See our products

Do machines have to be newly calibrated when using TPEs?

Calibration is generally not necessary. However, harder compounds may require additional devices for support.

Which extrusion tools are used in TPE processing?

For processing TPEs, simple die tools are usually sufficient. However, the die land should be kept as small as possible. Multi-plate tools that are equipped with corresponding flow corrections may be beneficial due to lower longitudinal shrinkage and less warpage of the profiles. This also enables higher production speeds. Important: Sharp tool edges should be avoided, especially when the material escapes.

Frequently Asked Questions (FAQ)

  • Can TPEs that have been processed using extrusion be recycled?

    1

    Some of the thermoplastic elastomers produced by KRAIBURG TPE are part of a closed recycling cycle and can be recycled after the product life has ended.

  • Can TPE profiles be returned to in-process recycling?

    1

    In many cases, it is possible to recycle scrap or edge trims within the production process. They are made suitable for dosing in slow-running shredders and added to the original process in proportions of 2 to 15 percent. Users are thus able to reduce costs and make a major contribution to sustainability through in-process recycling!

DOWNLOAD WHITEPAPER Processing of Thermoplastic Elastomers - Injection molding and Extrusion

Share this post



Grit Müller
KRAIBURG TPE Dipl.-Ing. Kunststofftechnik (FH)

Related Posts

Featured Knowledge Article

The Co-extrusion Process

Unlocking Innovation: The Power of the Co-extrusion Process
Thermoplastic elastomers (TPE) are an indispensable tool used by processors, product developers and designers alike. They combine the dynamic processing properties of thermoplastic plastics with the softness and flexibility of elastomers.
Grit Müller ■ 8 min read
Featured Knowledge Article

The Injection Molding Process

Discover how our injection molding delivers high-quality, custom plastic parts quickly and accurately.
Discover how advanced injection molding techniques enable high-quality, customized plastic parts with speed and accuracy.
Grit Müller ■ 9 min read
Featured Knowledge Article

什么是TPU？

热塑性聚氨酯 | Thermoplastic Polyurethane (TPU)
在热塑性弹性体中，热塑性聚氨酯（TPU）属于一个子类。这些材料是聚醚或聚酯与经典聚氨酯的嵌段共聚物。
Josef Neuer ■ 1 min read
Featured Knowledge Article

什么是TPO？

热塑性聚烯烃 | Thermoplastic polyolefins
烯烃热塑性材料（例如PP）与非交联弹性体（例如EPDM）的混合物。
Josef Neuer ■ 1 min read
Featured Knowledge Article

什么是 TPC？

热塑性聚酯弹性体 | Thermoplastic polyester elastomers (TPC)
热塑性聚酯弹性体（TPC）是聚酯和聚醚的嵌段共聚物。TPC属于热塑性弹性体的一个子类。
Josef Neuer ■ 1 min read
Featured Knowledge Article

什么是TPA？

热塑性聚酰胺弹性体 | Thermoplastic polyamide elastomers (TPA)
热塑性聚酰胺弹性体（TPA）是基于聚酰胺和醚化合物或聚酰胺和酯化合物的嵌段共聚物。在聚合物链中，聚酰胺（例如PA6）代表硬相，而醚或酯化合物代表弹性性能的软相。TPA属于热塑性弹性体的一个子类。
Josef Neuer ■ 1 min read
Featured Knowledge Article

什么是TPS？

热塑性苯乙烯嵌段共聚物 | Thermoplastic styrene block copolymers (TPS)
热塑性苯乙烯嵌段共聚物，或称TPS，是热塑性弹性体（TPE）的一个子类。
Josef Neuer ■ 1 min read
Featured Knowledge Article

什么是TPV？

热塑性硫化物 | Thermoplastic Vulcanizates (TPV)
TPV是热塑性硫化物的缩写。TPV是一种弹性且可热塑性加工的材料，主要基于聚丙烯和EPDM。它们属于热塑性弹性体（TPE）的一般类别中的一个子类。
Josef Neuer ■ 11 min read